Request a firewall rule 0:48
Describe the traffic and let FireSight trace the path, pick the firewalls and check the rule, then confirm and submit.
Guides
See FireSight in under a minute at a time
Short narrated walk-throughs recorded in the built-in demos, with captions for watching on mute. Each one shows a single task from start to finish.
FireSight
Firewall rule requests, approvals and audits
Approve a change 1:02
Team lead, security and the change board each review the request, the traced path and the pre-check, and approve their stage.
Deploy and back out 0:43
An implementer checks the plan, deploys to every firewall on the path, and backs it out again exactly.
Review the rule base 0:34
Find shadowed, redundant, unused and overly broad rules, and see them in evaluation order.
Set up approval chains 0:46
Create a chain for a team or data owner, and add a condition that sends sensitive traffic to it.
Assess firewalls offline 0:43
Upload FortiGate configuration files or a FortiManager export and get the full audit without connecting.
Device health and alerts 0:49
See which firewalls are down or congested, mute one for maintenance, and send alerts to email, Teams or Slack.
Recorded with demo data in simulate mode. Want to see it on your own firewalls? Request a demo.
FireSight OT
Secure OT remote access, one task at a time
The same short walk-throughs for FireSight OT, recorded on a Cloud Hub with sample plants and one live machine network.
More on each topic: PLC remote access, vendor remote access, duplicate IP addresses and remote support for machine builders.
Open a machine in your browser 0:40
Open a line's live HMI straight from My access, through the site's Cloud Connector, and see how people connect their own tools with the client.
Publish a machine 0:41
Add a PLC on a site's Cloud Connector, choose which division may use it, and see the Hub address it gets.
Give a machine builder access 0:43
Grant an outside vendor one machine, set working hours, and see exactly what the machine builder sees.
Identical sites, no renumbering 0:53
Two plants with the same 192.168.1.0/24, each with addresses of its own on the Hub, and nothing changed at the site.
Check a site remotely 0:38
Device status, a port test from inside the plant network, and diagnostics, without a site visit.
Get files off the plant floor 0:39
Upload-only storage on each Cloud Connector, copies on the Hub, and collection by your backup software.
Follow every session 0:33
Search the audit log for a machine or vendor, filter by kind of event, and export it as CSV.
Recorded with sample data and a demo PLC and HMI. Want to see it with your own sites? Talk to us about OT.